How You Reset for Recycling Again on 250

Mill reset or reboot your SmartThings hub

If you are having issues with your SmartThings hub, SmartThings Wifi, Connect Home, or modem, you tin can reset or reboot the device. But what'south the deviation between a reset and reboot? A factory reset will restore your hub to its default settings and remove all information (like device connections) if you lot'd like to start from scratch. A reboot will only power the hub on and off and so refresh your settings; no devices or settings will exist removed. No affair which type of hub you lot have, performing a factory reset or reboot will be quick and easy.

Notation: Available features, carte du jour options, and settings will vary past the hub and software version. Performing a factory reset will remove all settings and configurations, including connections between the hub and other devices.

Yous can as well manually reset the hub if needed. However, the procedure will be a piddling different depending on what kind of hub you have.

SmartThings Hub (2018)

First, unplug the ability cablevision from the back. Then, using a pin or similar tool, concur down the RESET button. Keep to hold the button while reinserting the ability cable, and until the LED on the front switches from flashing yellow to solid yellow.

Note: If you do not release the push button within a few seconds subsequently the LED switches to solid yellow, the hub may non begin the reset.

SmartThings Hub v2

Press and agree the red recessed push button at the back of the hub for 30 seconds. When the LED on the front switches from flashing yellowish to solid yellowish, release the button. Make sure the hub is plugged in with the included power and Ethernet cables. Practice non disconnect the cables.

SmartThings Wifi or Connect Home

Disconnect the power cablevision from the hub, so reconnect information technology. Next, insert a small tool into the hub'south RESET button, located on the dorsum of the hub. Remove the tool when the LED on the front end goes nighttime. The LED volition reboot and blink reddish and dark-green when the hub is ready for setup.

You tin can reset your SmartThings Wifi hub right from the SmartThings app!

Open the SmartThings app, then tap the Devices tab, and so tap the Home icon. Select your desired location,swipe through the rooms to detect your hub, and then select it.

Tap Network status, and so tap your Wi-Fi hub. Tap More options (the three vertical dots), and so tap Factory reset. Tap Reset to confirm.

The Connect Dwelling is another hub that can be reset from the app and doesn't always require a concrete reset.

Open the SmartThings app, and so tap the Devices tab, and then tap the Home icon. Select your desired location, swipe through the rooms to find your Connect Home, and and then select it.

Tap the Wi-Fi hub image. Swipe to and tap Factory reset, and and then tap RESET. The hub volition reboot and when the LED blinks cerise and light-green, the hub will be set for setup.

Note: All continued devices must be reset (or excluded) before they tin can exist reconnected.

Hubs with a firmware version below 17.11 require a bit more attention. You'll take to remove all your continued devices and app configurations, such as Automations, Scenes, and SmartApps, before you can reset the hub.

• Delete all automations: Navigate to and open the SmartThings app. Tap the Automations tab, and so tap More options (the three vertical dots). Tap Delete, and then deselect an automation. TapDelete again to confirm, and then tap Done. Echo this for all of your automations.

• Delete all scenes: Open the SmartThings app, and then tap the Automations tab. Tap More options (the iii vertical dots), then tap Delete, and then deselect a scene. TapDelete, and and so tap Delete again to ostend. Tap Done. Repeat this for all of your scenes.

• Delete all devices: Open the SmartThings app, then tap the Devices tab, so tap the Dwelling house icon. Select your desired location. Then, tap thedrop-down menu and tapAll devices. Tap More options (the three vertical dots), and then tap Delete. Tap the minus icons next to each device, then tapDeleteto confirm. Tap Done. Echo this for all of your devices in each location.

• Remove locations: Open the SmartThings app, and then tap the Devices tab. Tap the Abode icon, and so tapManage locations. Tap your desired location, then tapRemove location, and then tap Remove. Repeat this for all locations.

Once y'all've removed everything and the hub has been reset, you tin attempt toadd the hub to SmartThings again.

Reboot the SmartThings Wifi hub

Possibly the power went out recently and y'all're having trouble connecting your SmartThings Wifi. You lot tin perform a reboot through the SmartThings app to fix minor issues without losing your data.

Open the SmartThings app, then tap the Devices tab, and so tap the Domicile icon. Select your desired location, swipe through the rooms to find your hub, and and then select information technology. Tap Network status, and so tap your desired hub (Basement, Office, etc.). Adjacent, tap More options (the iii vertical dots), and and then tap Reboot device. Tap REBOOT. Your SmartThings Wifi hub volition disconnect and reboot.

Reboot the modem connected to SmartThings Wifi

If you're even so unable to connect to SmartThings Wifi, rebooting the modem should help. Unplug the modem and SmartThings Wifi hub, and wait ii minutes for both devices to fully power off. Then, plug them back in.

If information technology still won't connect, verify one end of the Ethernet cable is continued to the IN port on the SmartThings Wifi hub, and the other finish is connected to the modem. Make certain you are using the included Ethernet cable and both ends are tightly connected. If yous however tin't connect, endeavour using some other Ethernet cable that supports up to one Gbps.

If you're still experiencing issues with your SmartThings hub, such every bit an inactive or offline hub, you tin try rebooting information technology. This may as well assistance if some of your smart devices are not responding.

There are a few different kinds of SmartThings hubs (V1, V2, and V3), and so make sure y'all're performing the right steps for your model.

Thank you for your feedback!

smart-habitation|smartthings|hubs|smartthings-hub

© 2022 Samsung Electronics America, Inc. Samsung, Samsung Galaxy and Family unit Hub are trademarks of Samsung Electronics Co., Ltd. All other brands, products and services, and their respective trademarks, names and logos, are the property of their respective owners. The above content is provided for entertainment and information purposes merely. Consult user transmission for more complete information. All information included herein is subject to change without observe. Samsung is not responsible for whatever direct or indirect amercement, arising from or related to use or reliance of the content herein.

jensenhaffee.blogspot.com

Source: https://www.samsung.com/us/support/answer/ANS00048958/

Share this post